Ultralite Series Washout Booths

$1,000.00$1,130.00

Washout Booth

  • Polypropylene Construction
  • LED Backlights
  • Solvent Resistant
  • Easy clean drain
  • Frame Holder

Earn up to 57 Points.

Description

Ultralite Series Washout Booths

Having a high quality, well designed washout booth is critical in the proper cleaning and preparation of screens. Your Inks and emulsion can be power washed off the screen which will be contained within the sink. This will consequently keep other areas of your shop, stay clean and dry. Constructed of Polypropylene plastic. Therefore, it will hold up against years of daily washing, emulsion, and ink reclamation. In addition, Polypropylene will also deaden the vibration caused by high pressure sprayers making them much quieter when compared to stainless steel or galvanized metal booths. RhinoTech Ultralite Series Washout Booths are made with the busy printer in mind.

  • Integrated frame holder
  • Pressure washer wand mount
  • LED lighting
  • Translucent back panel
  • Waterproof light switch
  • 1/4″ thick chemical resistant polypropylene plastic
  • Easy clean drain
  • 1.5” threaded drain connection for easy plumbing
  • Fully welded material
  • Backlit for frame inspection
  • Convenient side-mounted On/Off Switch.
  • 120V Lighting
  • Size: 48″H x 32″W x 24″D OD

You may also want to add a filtration system to protect your shop and be more eco-friendly. Nowadays many local authorities require some type of filtration for screen printers. Be ahead of the game and filter your water before you are required to. The M-10 Filtration System catches the water and debris as it drains from the sink. It will go through 3 stages of filtration before entering the drain. As a result, a cleaner shop helps for a cleaner environment. RhinoTech Screen Printing Equipment.

Washout Booth Assembly Instructions:

First, Unwrap the legs and mounting hardware from inside the booth. Then place the booth upside down on a non-scratch surface. Next, attach a leg to one corner with 4 bolts. Slots have been placed to make the leg assembly easier. Place lock washer and nut onto the bolt and tighten. Repeat for the remaining 3 legs. With 2 people, flip the unit over onto the legs and place in the desired position. Attach plumbing or position filtration system, plug into the nearest outlet and you are done.

Additional information

Model-Ultralite

Ultralite: 32w x 48h x 24d

Reviews

There are no reviews yet.

Be the first to review “Ultralite Series Washout Booths”

You may also like…