AP 300 All Purpose Remover


1 sold in last 29 hours

AP300 All Purpose Ink & Emulsion Remover

  • Ink and Emulsion Remover
  • Biodegradable and Non-Toxic
  • Low VOC
  • 1:4 Mix Ratio
  Hurry up! Sale end in:

Earn up to 111 Points.

  • AP 300 All Purpose Remover, Image of AP 300 All Purpose Remover

    AP 300 All Purpose Remover


    Request a Call Back

    •  Ask a Question
      AP 300 All Purpose Remover, Image of AP 300 All Purpose Remover

      AP 300 All Purpose Remover


      Ask a Question

        ... people are viewing this right now

      Geneva Capital
      Financing and leasing options for orders of $5000 and above are available through our partner Geneva Capital. CLICK HERE TO GET INFORMATION.

      AP 300 All Purpose Remover is a single step ink cleaner and emulsion remover. Due to it being an all-in-one product, it will dissolve plastisol inks and emulsion from the screen printing frames in one step. It can be used for manual application or in RhinoTech’s dip/soak tanks for fast and easy cleaning. The time, labor cost and chemical savings will be seen immediately. AP300 is a highly concentrated liquid designed to be mixed with water 1:4 and will not separate.

      With RhinoClean AP 300 All Purpose Remover, screens can be cleaned for pennies, when combining the cleaning process into one. Formulated with a low VOC, low odor, non-flammable, non hazardous formula. This will provide the benefits of less labor, less expense and improved efficiency to the screen cleaning and reclaiming operation.  It can be used straight or mix 1:4 water.

      • Designed to work quickly on all ink types.
      • Ideal for efficient and expedient screen washing and reclaiming after the press run.
      • Higher flash point than lacquer thinner, alcohols, ketones, etc.
      • Biodegradable and non-toxic.
      • Dissolves and cleans ink and emulsion in one step which makes the job of screen reclaiming much faster and more efficient.
      • It has no odor which makes the job of screen reclaiming much more pleasant.
      • Low VOCs making this product safer than solvents for air quality concerns.
      • This product is non flammable which makes it safer for handling, storage, and rag disposal than conventional solvents.

      Mixing Instructions

      • Mix AP300 with water up to 1:4 ratio.
      • Example: Mix 1 gallon of AP300 with 4 gallons of water. This will make 5 gallons of ready to use product.


      1. To remove ink and emulsion from the screen, apply AP300 to both sides of the screen or soak in a dip/soak tank prior to removal.
      2. If applying manually, scrub both sides of the screen with a brush or rag.
      3. With a high pressure washer, blast the stencil out of the mesh.
      4. If any residue is left behind SW210 Ink Degradent or Haze Remover 2800 can be used for final clean up.
      Container Size

      2 oz. Booster (used per gallon), Quart, Gallon, 5 Gallon, 55 Gallon

      Product Documents

      Data Sheet


      My Cart
      Close Recently Viewed